Remington REMJ150 Storing, Preventative Maintenance Schedule, Transporting, Or Shipping, How To

OPERATION

Continued

STORING,

TRANSPORTING, OR SHIPPING

PREVENTATIVE MAINTENANCE SCHEDULE

8

To Stop Heater

1.Turn ON/OFF switch to “OFF.”

2.Unplug power cord from outlet.

To Restart Heater

1.Wait 2 minutes after stopping heater.

2.Repeat steps under To Start Heater, page 7.

Note: If shipping, transport companies require fuel tanks to be empty.

1.Drain fuel tank by removing drain plug on underside of fuel tank.

2.Replace drain plug.

3.If any debris is noted in old fuel, add 1 or 2 quarts of clean kerosene to tank, stir, and drain again. This will prevent excess debris from clogging filters during future use.

4.Replace drain plug. Properly dispose of old and dirty fuel. Check with local automotive service stations that recycle oil.

5.If storing, store heater in dry place. Make sure storage place is free of dust and corrosive fumes.

IMPORTANT: Do not store kerosene over summer months for use during next heating season. Using old fuel could damage heater.

WARNING

Never service heater while it is plugged in, operating, or hot. Severe burns and electrical shock can occur.

Item	How Often	How To
Fuel tank	Flush every 150-200 hours	See Storing, Transporting, or
	of operation or as needed.	Shipping, above.
Air output and	Replace every 500 hours of	See Air Output, Air Intake,
	lint filters operation or once	and Lint Filters, page 12.
	a year.
Air intake	Wash and dry with soap and	See Air Output, Air Intake,
filter	water every 500 hours of	and Lint Filters, page 12.
	operation or as needed.
Fuel filter	Clean twice a heating season	See Fuel Filter, pages 10
	or as needed.	and 11.
Spark plug	Clean and regap every 600	See Spark Plug, page 11.
	hours operation or replace
	as needed.
Fan blades	Clean every season or as needed.	See Fan, page 15.
Motor	Not required/permanently
	lubricated

102961