Operator’s Manual
RM115ST
Electric Trimmer
SAFETY
• SAFETY ALERT SYMBOLS •
Safety alert symbols are used to draw your attention to possible dangers. These symbols, and their explanations, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures. These safety instructions are not meant to cover every possible condition that may occur. If questions arise, please call the Customer Support Department at
SYMBOL MEANING
DANGER: Signals an EXTREME hazard.Failure to obey a safety DANGER signal WILL result in serious injury or death to yourself or to others.
WARNING: Signals a SERIOUS hazard.Failure to obey a safety WARNING signal CAN result in serious injury to yourself or to others.
CAUTION: Signals a MODERATE hazard.Failure to obey a safety CAUTION signal MAY result in property damage or injury to yourself or to others.
IMPORTANT! Signals special mechanical information.NOTE: Signals additional important general information.• IMPORTANT SAFETY INSTRUCTIONS •
READ ALL INSTRUCTIONS BEFORE OPERATING| TABLE OF CONTENTS |
|
Service ................................................................................................................................................... | 1 |
Safety..................................................................................................................................................... | 1 |
| Know Your Unit ...................................................................................................................................... | 2 |
Assembly ............................................................................................................................................... | 3 |
Starting and Stopping............................................................................................................................ | 3 |
Operation ............................................................................................................................................... | 3 |
| Line Installation ...................................................................................................................................... | 4 |
| Cleaning and Storage ............................................................................................................................ | 4 |
| Troubleshooting ..................................................................................................................................... | 4 |
| Specifications ........................................................................................................................................ | 4 |
Warranty............................................................................................................................................... | 16 |
All information, illustrations and specifications in this manual are based on the latest product information available at the time of printing. We reserve the right to make changes at any time without notice.
Copyright© 2011 MTD SOUTHWEST INC, All Rights Reserved.SERVICE
DO NOT RETURN THIS UNIT TO THE RETAILER. PROOF OF PURCHASE WILL BE REQUIRED FOR WARRANTY SERVICE.
For assistance regarding the assembly, controls, operation or maintenance of the unit, please call the Customer Support Department:
www.remingtonpowertools.com
Please call the Customer Support Department for replacement parts. When servicing, use only identical replacement parts.
WARNING:When using an electric unit, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:
CALIFORNIA PROPOSITION 65
WARNING: Battery posts, terminals and certain finished components contain lead, lead compounds and chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
GENERAL SAFETY•DO NOT rely exclusively upon the safety devices built into the unit.•DO NOT allow the unit to be used as a toy.•DO NOT use the unit in the presence of flammable liquids or gases.•DO NOT attempt operations beyond the operator’s capacity or experience.•DO NOT over reach.•DO NOT operate the unit on unstable surfaces, such as trees, ladders, slopes or rooftops. Be very careful when using the unit on stairs.
•DO NOT force the unit. It will do a better, safer job when used at the intended rate.
•Please read the entire operator’s manual carefully before attempting to assemble, operate or maintain the unit.
•Follow all safety instructions. Failure to do so can result in property damage or serious injury to yourself and/or others.
•Be thoroughly familiar with the controls and the proper use of the unit. Know how to stop the unit and disengage the controls quickly.
•Stay alert! Do not operate the unit when tired, ill or under the influence of alcohol, drugs or medication.
•Never allow children or teens under the age of 15 to operate the unit, except teens guided by an adult. Never allow adults to operate the unit without proper instruction.
•Keep these instructions. Refer to them often and use them to instruct other users. If loaning someone this unit, also loan them these instructions.
•Keep bystanders, especially children and pets, at least 50 feet (15 m) away. If anyone enters the work area, stop the unit!
•Never allow bystanders to contact the unit or extension cord.•Keep the work area clean. Cluttered areas invite injuries. Do not start the operation until the work area is clear and free from obstructions and there is secure footing.
•Always wear appropriate eye and ear protection when operating this unit. Wear safety goggles, or safety glasses with side shields, that are marked as meeting ANSI
•Dress appropriately. Wear
•Use the right tool. Only use the unit for its intended purpose. Only use the unit as described in this manual.
•Always hold the unit with both hands when the motor is running. Use a firm grip with thumbs and fingers encircling the handle(s) and/or grip(s).
•Keep hands, face and feet away from openings and moving parts. Do not touch or try to stop any moving parts while they are in motion.
•Keep proper footing and balance at all times.•Always stop the motor when operation is delayed, before setting down the unit or when walking from one location to another. Make sure the unit comes to a complete stop.
•To avoid accidental starting, never carry the unit with fingers on the switch trigger.
•Always carry the unit by the handle(s) with the unit disconnected from the power source.
•Always make sure the switch trigger is disengaged before connecting or disconnecting the unit from the power source.
•Make sure that all guards and safety attachments are properly installed before operating the unit.
•This unit is intended for infrequent use by homeowners. It is not intended for prolonged use.
MAINTENANCE AND STORAGE SAFETY•DO NOT operate a unit that is damaged, improperly adjusted or not completely and securely assembled. Be sure that the unit stops when the switch trigger is released. Do not use the unit if the switch trigger does not turn the unit on and off properly.
•DO NOT perform maintenance procedures other than those described in this manual. Do not attempt to repair; there are no user serviceable parts inside.
•If the unit is not working as it should, has been dropped, damaged, left outdoors or dropped into water, do not use the unit.
•If the unit strikes or becomes entangled with a foreign object, stop the unit immediately and check for damage.
•Follow all maintenance instructions in this manual.•Before inspecting, servicing, cleaning, storing, transporting or replacing any parts on the unit:
1.Make sure the motor is off.2.Make sure all moving parts have stopped.3.Disconnect the unit from the power source.4.Allow the unit to cool.•Never remove, modify or make inoperative any safety device furnished with the unit.
•Frequently inspect the unit for damage. Before further use, any damaged part should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts and any other conditions that may affect its operation. Damaged parts should be properly repaired or replaced.
01/11 |