Remington RM180B Operating the, Blower, Blower Operation, •Donotoperateblowernear bystanders or pets, •Do not blow nails, bolts, rocks, or other hard ob- jects

Operating the	Blower Operation
Blower

The on/off toggle switch has two settings; off and on. The rear switch position,marked“I”,ison.Theforward switch position, marked “O”, is off. (See Figure 6)

WARNING: The blower can throw debris, causing injury to those nearby.

•Do not blow nails, bolts, rocks, or other hard ob- jects.

•Donotoperateblowernear bystanders or pets.

•Be careful when blowing debris from stairs, cor- ners, or other tight areas. Objects can be blown back toward operator.

•Wear approved eye pro- tection, long pants, and shoes while operating this blower.

Properly assemble the blower for blower operation (see page 7, Assembling Blower). Follow the steps below to operate the blower.

1.Hold blower using the handle on housing. (See Figure 6)

2.When ready to start the blower, toggle the on/off switch to the “I” setting.

3.To stop the blower, toggle the on/ off switch to the off “O” setting.

Figure 7- Holding blower for blower operation

Figure 6 - On/Off switch positions

ENGLISH

9