Remington Power Tools 107625-02, 107624-02 Unpacking, Saw Maintenance and Kickback Safety

IMPORTANT SAFETY INFORMATION

•Never try cutting through two logs at same time. Only cut one log at a time.

•Do not bury guide bar nose or try plunge cut (boring into wood using guide bar nose).

•Watch for shifting of wood or other forces that may pinch chain.

•Use extreme caution when reentering a previous cut.

•Use low-kickback chain and guide bar supplied with this chain saw. Only replace these parts with chains and guide bars listed in this manual.

•Never use dull or loose chain. Keep chain sharp with proper tension.

Saw Maintenance and Kickback Safety

Follow maintenance instructions in this manual. Proper cleaning of saw and chain and guide bar maintenance can reduce chances of kickback. Inspect and maintain saw after each use. This will increase the service life of your saw. Note: Even with proper sharpening, risk of kickback can increase with each sharpening.

MAINTENANCE AND STORAGE OF CHAIN SAW

1.Unplug chain saw from power source

•when not in use

•before moving from one place to another

•before servicing

•before changing accessories or attachments, such as saw chain and guard

2.Inspect chain saw before and after each use. Check saw closely if guard or other part has been damaged. Check for any damage that may affect operator safety or operation of saw. Check for alignment or binding of moving parts. Check for broken or damaged parts. Do not use chain saw if damage affects safety or operation. Have damage repaired by authorized service center.

3.Maintain chain saw with care.

•Never expose saw to rain.

•Keep chain sharp, clean, and lubricated for better and safer performance.

•Follow steps outlined in this manual to sharpen chain.

•Keep handles dry, clean, and free of oil and grease.

•Keep all screws and nuts tight.

•Inspect power cord often. If damaged, have repaired by authorized service center.

•Never carry chain saw by power cord.

•Never yank power cord to unplug it.

•Keep power cord from heat, oil, and sharp edges.

•Inspect extension cords often and replace if damaged.

4.When servicing, use only identical replacement parts.

5.When not in use, always store chain saw

•drain oil after each use and before storing saw to prevent oil leakage.

•in a high or locked place, out of children’s reach

•in a dry place

•in a carrying case or with scabbard over guide bar

UNPACKING

1.Remove all items from carton.

2.Check all items for any shipping damage. If you find any damage or if any parts are missing, call Technical Services at 1-800-626-2237 for prompt service.

SAVE THESE

INSTRUCTIONS

www.remingtonpowertools.com 6