![](/images/new-backgrounds/1111619/11161935x1.webp)
REPLACEMENT CHAINS
Replacement saw chains may be available at your local hardware or home improvement store.
The following list gives the specifications for replace- ment chains.
All chains will be .050 gauge, 3/8 pitch. 14" chains have 56 drive links 16" chains have 58 drive links
You may also order the replacement saw chains from the "Online Outlet" at www.remingtonpowertools. com using the part number listed in the illustrated parts list on pages
STORAGE
If storing saw for more than 30 days, follow steps below.
1.Drain oil tank after each use.
2.Remove and clean guide bar and chain. Clean guide bar and chain by soaking in petroleum based solvent or mild soap and water mixture.
3.Dry guide bar and chain.
4.Place chain in container filled with oil. This will prevent rust.
5.Wipe a thin coating of oil over surface of guide bar.
6.Wipe off outside of saw body. Do this with soft cloth dampened with a mild soap and water mixture.
7.Store chain saw
•in a high or locked place, out of children’s reach
•in a dry place
•in a carrying case or with scabbard over guide bar
TECHNICAL SERVICE
You may have further questions about assembling, operating, or maintaining this product. If so, you can visit our Technical Service web site at www. remingtonpowertools.com or contact our Techni- cal Service Department at
DESA Power Tools ATTN: Technical Service P.O. Box 90004
Bowling Green, KY
When contacting DESA Power Tools, have ready
•Your Name
•Your Address
•Your Phone Number
•Model Number of Product
•Date of Purchase (Include copy of receipt for writ- ten requests).
We reserve the right to amend these specifications at any time without notice. The only warranty ap- plicable is our standard written warranty. We make no other warranty expressed or implied.
REPLACEMENT PARTS AND ACCESSORIES
WARNING: Use only replacement parts and accessories described in this manual. Use of other parts or accessories could damage saw or injure operator.
For original replacement parts and accessories, con- tact your nearest Authorized Dealer or Authorized Service Center for this product. If they can not sup- ply the part or accessory, contact your nearest Parts Central listed on page 67. Each Authorized Dealer, Authorized Service Center, and Parts Central is independently owned and operated.
See pages 63 through 66 for an Illustrated Parts List. If you need additional referral information, contact our Technical Service Department (see Technical Service). In Canada call
REPAIR SERVICE
Note: Only use original replacement parts. This will protect your warranty coverage for parts replaced under warranty.
Each Authorized Service Center is independently owned and operated.
Warranty Service
If product requires warranty service, return it to nearest Authorized Service Center. You must show proof of purchase. If faulty materials or workmanship caused damage, we will repair or replace product without charge. Note: Normal wear, misuse, abuse, neglect, or accidental damage is not covered under warranty.
Non-Warranty Service
If product requires service, return it to nearest Au- thorized Service Center. Repairs will be billed to you at regular repair list prices.
For additional Service Center or warranty informa- tion, call
www.remingtonpowertools.com | 18 |