T3 Universal System Controller

ƒBoth infrared (IR) and radio frequency (RF) output options. You can even use both options on the same unit.

ƒA built in motion sensor can automatically turn the unit on when it is picked up.

ƒA USB port for communication with the TheaterTouch Designer programming software.

ƒNon-volatile flash memory. The T3 will not lose any programmed data when the battery is removed.

ƒOne-year parts and labor warranty

ƒAvailable only to system integration professionals.

IMPORTANT NOTES

Please read these important notes about the T3:

ƒThe T3 should be placed in an area where it is around normal room temperature (between 60°F to 90°F). If the temperature is too hot, the display appears dim. If the temperature is too cold, the display appears dark and may respond slowly.

ƒDo not use sharp objects on the touchscreen. It is designed to operate with a touch of your finger.

ƒDo not let the T3 get wet. It should not be handled with wet hands or placed in an area where it could get wet.

ƒDo not subject the T3 to smoke, dust, or vibrations. The display may be damaged from excessive shock or vibration.

ƒOnly use the power supply that is provided with the T3. Using the wrong type of power supply may result in damage to the battery or electronic components.

4