T3 Universal System Controller
often. Since the T3 can safely be charged after each use, a docking station is included for convenience. If left out of the docking station, the T3 will remain in sleep mode for 1 – 2 months before shutting down. At that point the battery must be recharged.
The T3 Docking Station can be placed on a flat surface such as a shelf or table, or it can be mounted to a wall using the mounting holes on the back of the unit.
If the T3 battery capacity is reduced to approximately 25 percent, a low battery icon will appear in the top center of the display:
The low battery icon will change color to red if the battery capacity becomes critically low:
At this point the T3 must be placed into the docking station to recharge the battery.
The docking station LED illuminates to indicate a charge in progress. The LED will turn off when the battery in the unit is fully charged.
A fully discharged battery will take approximately
The T3 can remain in the docking station indefinitely without damage to the battery.
6