32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
REJ10B0223-0140/Rev.1.40 Jan. 2007 Page 12 of 79
The following shows how to set the M3A-2154 Evaluation Board.
Use a 5V DC power supply to feed power to the M3A-2154 Evaluation Board.
Use an included 5V power supply cable to connect the 5V DC power supply and CN2 connector
included with the M3A-2154 Evaluation Board.
The Connecting when Feeding Power to the M3A-2154 Evaluation Board is shown in Figure 5.4
Figure 5.4 Connecting when Feeding Power to the M3A-2154 Evaluation Board
Connecting the 5V power supply with the included cable turns the M3A-2154 Evaluation Board
powered on.
By disconnecting it, the M3A-2154 Evaluation Board turns powered off.