Renesas M302N1, M302N2, M302N2T-PRB Chapter 2. Preparation

( 14 / 38 )

Chapter 2. Preparation

2.1 Package Components

This product consists of the following items. When unpacking, check to see if your product package

contains all of these items.

Table 2.1 Package components

Please keep the M302N2T-PRB's packing box and cushion material in your place for reuse at a later

time when sending your product for repair or other purposes. Always use these packing box and

cushion material when transporting the M302N2T-PRB.

If any of these items are missing or found faulty, please contact your local distributor. Also, if there

is any question or doubt about the packaged product, contact your local distributor.

2.2 Other Tool Products Required for Development

To bring forward programs development on the M302N1 and M302N2 Group MCUs, the products

listed below are necessary in addition to the package components listed above. Get them separately.

Table 2.2 Other tool products

To purchase these products, contact your nearest distributer.

Emulator main unit

Emulation pod main unit

Emulator debugger

Converter board

PC4701

M30200T-RPD-E

M3T-PD30 Ver.4.00 or later

M302N1T-56FPB converter board for M302N1 Group MCUs

(Necessary for evaluating M302N1 Group MCUs)

Item

M302N2T-PRB pod probe for M302N1 and M302N2 Group MCUs

Screws (screws for fixing pod probe: pre-installed to the pod probe)

FLX-80QSB converter board for 80-pin 0.65-mm-pitch QFP (80P6S-A)

M302N2T-PRB User's Manual (this manual)

M302N2T-PRB User's Manual (Japanese)

M302N2T-PRB Repair Request Sheet (English/Japanese)

Quantity

1

2

1

1

1

1

Contents

Main ( 2 / 38 ) Preface To use the product properly Precautions for Safety: Contents Terminology Page Page Chapter 1. Precautions for Safety WARNING IMPORTANT CAUTION Note on Final Evaluation: Note on Differences from Actual MCUs: Note on Clock Supply to the MCU: Notes on Interruption: Note on the Work Area: Note on Accessing SFR Area: Note on Commands that Access the Single-step Interrupt Vector Area: Note on MAP References and Settings: Page Page Chapter 2. Preparation 2.1 Package Components 2.2 Other Tool Products Required for Development 2.3 System Configuration Page Page Note on Settings of JP1 and JP2: Chapter 3. Setting Up 3.1 Switch Settings 3.2 A-D Conversion Bypass Capacitor Note on the Operation of A-D Converter: When Connecting Pod Probe: 3.3 Connecting the M30200T-RPD-E Page Page Note on Connecting the Target System: 3.5 Procedures for Making MCU File for M3T-PD30 Page Chapter 4. Specifications 4.1 Specifications Table 4.1 lists the specifications of the M302N2T-PRB. Table 4.1 Specifications of M302N2T-PRB 4.2 External Dimensions Page Page Chapter 5. Troubleshooting When this product does not work properly, check the following. 5.1 When the Emulator Debugger Does Not Start Up Properly (1) When the LED Display of PC4701 is Abnormal Table 5.1 LED's abnormal display and its checkpoints (2) Errors Occur When Starting Up the Emulator Debugger (When the target system is connected) Table 5.2 Checkpoints of errors when starting up the emulator debugger (target is connected) See the user's manuals of the PC4701 and emulator debugger. See the user's manual of the emulator debugger. See "3.3 Connecting the M30200T-RPD-E" (page 20). 5.2 Operation Differs from That of Actual MCUs Page Chapter 6. Maintenance and Guarantee 6.1 Maintenance 6.2 Guarantee 6.3 Repair Provisions 6.4 How to Request for Repair Note on Transporting the Product: