Manuals / Brands / Computer Equipment / Network Card / Renesas / Computer Equipment / Network Card

Renesas M302N1, M302N2, M302N2T-PRB Preface, To use the product properly

1 38

Download 38 pages, 328.33 Kb

( 3 / 38 )

Preface

The M302N2T-PRB is a pod probe for the M302N1 and M302N2 Group of Renesas 16-bit MCUs.

The M302N2T-PRB is used by connecting to the PC4701 emulator main unit and the M30200T-RPD-E

emulation pod main unit.

This manual mainly explains specifications and how to set up the M302N2T-PRB. For detail

information about the emulator main unit, emulation pod main unit, and emulator debugger, refer to

each user's manual.

Emulator main unit: PC4701 User's Manual

Emulation pod main unit: M30200T-RPD-E User's Manual

Emulator debugger: M3T-PD30 User's Manual

To check the components of this product, refer to "Table 2.1 Package Components" (page 14) in this

manual. If there is any question or doubt about this product, contact your local distributor.

To use the product properly

Precautions for Safety:

•Both in this User's Manual and on the product itself, several icons are used to insure

proper handling of this product and also to prevent injuries to you or other persons,

or damage to your properties.

•The icons' graphic images and meanings are given in "Chapter 1. Precautions for

Safety". Be sure to read this chapter before using the product.

Contents

Main ( 2 / 38 ) Preface To use the product properly Precautions for Safety: Contents Terminology Page Page Chapter 1. Precautions for Safety WARNING IMPORTANT CAUTION Note on Final Evaluation: Note on Differences from Actual MCUs: Note on Clock Supply to the MCU: Notes on Interruption: Note on the Work Area: Note on Accessing SFR Area: Note on Commands that Access the Single-step Interrupt Vector Area: Note on MAP References and Settings: Page Page Chapter 2. Preparation 2.1 Package Components 2.2 Other Tool Products Required for Development 2.3 System Configuration Page Page Note on Settings of JP1 and JP2: Chapter 3. Setting Up 3.1 Switch Settings 3.2 A-D Conversion Bypass Capacitor Note on the Operation of A-D Converter: When Connecting Pod Probe: 3.3 Connecting the M30200T-RPD-E Page Page Note on Connecting the Target System: 3.5 Procedures for Making MCU File for M3T-PD30 Page Chapter 4. Specifications 4.1 Specifications Table 4.1 lists the specifications of the M302N2T-PRB. Table 4.1 Specifications of M302N2T-PRB 4.2 External Dimensions Page Page Chapter 5. Troubleshooting When this product does not work properly, check the following. 5.1 When the Emulator Debugger Does Not Start Up Properly (1) When the LED Display of PC4701 is Abnormal Table 5.1 LED's abnormal display and its checkpoints (2) Errors Occur When Starting Up the Emulator Debugger (When the target system is connected) Table 5.2 Checkpoints of errors when starting up the emulator debugger (target is connected) See the user's manuals of the PC4701 and emulator debugger. See the user's manual of the emulator debugger. See "3.3 Connecting the M30200T-RPD-E" (page 20). 5.2 Operation Differs from That of Actual MCUs Page Chapter 6. Maintenance and Guarantee 6.1 Maintenance 6.2 Guarantee 6.3 Repair Provisions 6.4 How to Request for Repair Note on Transporting the Product: