Renesas M3S-UFLA32R 5.8 Lock Bit/Set

M3S-UFLA32R

UART Flash Memory Programming Utility

REJ10B0239-0140/Rev.1.40 Mar. 2007 Page 17 of 30

5.8 Lock Bit/Set

(1) Choose [Lock Bit]-[Set(S)] from [Device(D)] menu to display the dialog that shows execution process,

and then read out lock bit. After completing read of lock bit, the dialog is closed and "Lock Bit Set"

dialog is displayed.

Figure 5.8.1 Lock Bit Set

Note: To clear lock bit, perform the following steps.

1. Execute [Lock Bit]-[Disable(D)] in [Device(D)] menu.

2. Execute [Erase(E)] or [Block Erase(L)] in [Device(D)] menu.

By following the procedures above, lock bit in the corresponding block can be cleared.

This is the only way to clear lock bit.

Contents

Main Rev.1.40 Revision Date: Mar. 06, 2007 M3S-UFLA32R Users Manual UART Flash Memory Programming Utility Notes regarding these materials Page Contents 1. Overview 2. System Configuration 2.2 Communication Cable (M3A-2145G50) Page 2.3 Target MCU/Target Board 2.4 Host PC 3. Installation of the M3S-UFLA32R 3.1 Installation of the M3S-UFLA32R 4. Operation Method of the M3S-UFLA32R 4.1 Startup 4.2 Exit 4.3 Operation Outline of the M3S-UFLA32R Page M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev.1.40 Mar. 2007 Page 8 of 30 5. Function Description of the M3S-UFLA32R 5.1 Function List 5.2 Program Data (Motorola S-format file) Selection 5.3 Exit the Application 5.4 Lock Bit Information Page 5.5 Program 5.6 Erase 5.7 Block Erase Page 5.8 Lock Bit/Set Page 5.9 Lock Bit/Enable 5.10 Lock Bit/Disable 5.11 Blank Check 5.12 Verify Check 5.13 E.B.P.V. (Erase, Blank Check, Program, Verify Check) 5.14 E.P. (Erase, Program) 5.15 B.P.V. (Blank Check, Program, Verify Check) 5.16 Setting Page 5.17 ID Code Setting Page 5.18 Version Information M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev.1.40 Mar. 2007 Page 30 of 30 6. Error Message List Revision History Uart Flash Memory Programming Utility Users Manual M3S-UFLA32R