REPOSE R500 User Guide
Using your Repose Massage Lounger
While positioning your massage lounger for use, please keep in mind that the leg rest and backrest will move up and down.
There must be at least 24 inches of clearance in front of and 20 inches behind the massage lounger to prevent damage to the lounger or any obstacles that might be in the way.
Lowering and Raising the Backrest
The backrest is raised and lowered using the control panel.
To lower the backrest:
1.Make sure the area behind the backrest is clear of obstacles.
2.Press and hold the lower backrest button on the control panel. Release the button when the backrest reaches a comfortable position. The backrest will stop automatically when it reaches the lowest point of travel.
To raise the backrest:
1.While sitting in your lounger, press and hold the raise backrest button. When the backrest reaches the upright position, it will stop.
Note: Pressing the power button will also raise the backrest and lower the leg rest while resetting the lounger.
Page 13 of 20
