Reassembling your Swift LT
1
Insert elbow into frame.
2
Align pillows with frame.
3
Push pillows firmly into frame. Ensure top and bottom retention tabs slot into place.
4 |
5 |
Check positioning markers on pillows and headgear are on the same side.
Slide left and right headgear stability arms onto frame. Ensure inner wall of pillows is in correct position.
If not, squeeze pillow sides to release inner walls.
Reassembling the headgear
A |
B |
Lay out the headgear as | (A) Thread the top straps |
shown, writing facing | through the top buckle, |
upwards. | then (B) back over to |
| secure. |
A
B
(A)Thread both backstraps through the back buckle (Velcro™ facing outwards), then (B) fold back over to secure.
6
