Fitting your Swift LT
B
1
A
2
3
English
(A) Hold the pillows at | Adjust top straps (over- |
your nose; (B) pull the | tightening may cause |
headgear over your head. | excess pressure on your |
| nose). |
4 | 5 |
Rotate frame to adjust | Connect the short tube |
pillow angle to ensure it | to the flow generator’s air |
sits comfortably. | tubing. |
Using Tube Retainer (Optional)
Adjust each end of the backstrap (overtightening may cause excess pressure on upper lip).
6
The Swift LT is now fitted and ready for use. Head- gear should sit midway between ear and eye.
1 |
Push tube retainer into buckle. Clip either short tube or air tubing to tube retainer.
2 | 3 |
When using the tube | If the mask pulls on your |
retainer, the tubing can be | nose, increase length of |
positioned to either side of | tube between mask and |
your face or centred. | tube retainer. |
3
