ResMed Pixi - page 14

Cushion check

Cushion check steps

1–2. Ensure the cushion is not creased or folded or caught inside the

sockets of the mask frame.

3. The Pixi cushion is designed to sit mid-bridge. Ensure that the mask

does not block the nose or mouth at any time.

1 2

Contents

Main Pixi A B iii iv v Pixi Intended use WARNING Set up Changing the side of the air tubing Attaching the headgear Page WARNING Fitting Fitting steps Page Adjustment Adjustment steps Attaching the pressure port 3 4 Attachment steps Page Page Emergency removal Disassembly Disassembly steps WARNING Page Headgear reassembly Headgear reassembly steps Page Reassembly 3 4 Reassembly steps Cleaning the mask WARNING CAUTION Troubleshooting Page Technical specications Storage Disposal Symbols Consumer warranty