Headgear reassembly
Pixi Hints!
•• You don’t need to disassemble your Pixi headgear to wash it.
•• The Velcro straps and plastic buckles have been color coded for ease of assembly.
Headgear reassembly steps
1.Lay the headgear and plastic buckles out on a flat surface as shown, ensuring the lower headgear arms are facing up.
2.Thread each light blue strap up and over the light blue buckle, then secure into place.
3.Thread each dark blue strap up and over the dark blue buckle, then secure into place.
4.Thread the Velcro only end of the lower headgear strap through the lower headgear arm, then secure into place. There is no need to attach the quick release clip to the headgear now.
Ensure that any Velcro or plastic parts are on the outer side of the mask, otherwise your headgear may be incorrrectly assembled. The headgear is now ready for fitting. Refer to the Set up illustrations in this guide.
1
3
2
12
