Flame retardant engineering thermoplastic +5ºC to +35ºC
10%–95%non-condensing-20ºC to +60ºC
10%–95%non-condensing
Sea level to 2591 m
Product complies with all applicable electromagnetic compatibility requirements (EMC) according to IEC60601-1-2, for residential, commercial, and light industry environments.
The electromagnetic compatibility tables for these ResMed devices can be found on www.resmed.com, on the Products page under Service & Support. Click on the PDF file for your device.
26 dBA with uncertainty of 2 dBA as measured according to ISO 17510-1: 2002
28 dBA with uncertainty of 2 dBA as measured according to ISO 17510-1: 2007
36 dBA with uncertainty of 2 dBA as measured according to ISO 17510-1: 2007
Recommended maximum supplemental oxygen flow: 4 L/min
Technical Specifications
. | |
Operating pressure range | 4 to 20 cm H2O |
Dimensions (H x W x D) | 112 mm x 164 mm x 145 mm |
Weight | 1.3 kg |
Power Supply | • Input range for S8 Lightweight II with HumidAire 4i:100–240V, |
| 50/60Hz; 110V, 400Hz; 2.5A < 140VA (110W) (maximum power |
| consumption). Instantaneous peak power consumption <340VA. |
| • Refer to the DC-12 converter instructions for DC ratings. Only |
| use the ResMed DC-12 converter for DC input. |
| • Typical power consumption at 20 cm H20 is 34VA or 20W. |
Air Filter | Two-layered, powder-bonded, polyester non-woven fiber |
Air Tubing | Flexible plastic,2 m |
Air Outlet | The 22 mm conical outlet complies with EN 1281-1 |
IEC 60601-1 Classifications Class II (double insulation), Type CF
DECLARED DUAL-NUMBER NOISE EMISSION VALUES in accordance with ISO 4871: Sound Pressure Level
Sound Power Level
Supplemental Oxygen
Housing Construction
Operating Temperature
Operating Humidity
Storage and Transport
Temperature
Storage and Transport
Humidity
Operating Altitude
Electromagnetic
Compatibility
Note: The manufacturer reserves the right to change these specifications without notice.
Technical Specifications | 13 |
