ResMed s8 manual How to change the language setting, Messages on the S8 Lightweight II LCD

1.On the standby (RAMP) screen, press .

2.Press until you see EPR LEVEL, then press (Change).

3.Press or until you see the setting that you require.

4.Press (Apply) to save the setting.

How to change the language setting

1.On the standby (Ramp) screen, press (Menu).

2.Press until you see LANG (Language), then press (Change).

3.Press or until you see the language that you require.

4.Press (Apply) to save the new language.

Messages on the S8 Lightweight II LCD

Your clinician may have set your S8 Lightweight II to remind you about important events, such as when to replace your mask, when to insert your Data Card (if your device is Data Card enabled) and so on.

The reminder message is displayed on the LCD and is visible if the device is not delivering therapy. The backlight on the LCD flashes when a message is displayed.

Your clinician can set any of the following reminders on your LCD:

Message Description Action

INSERT	May appear if your
CARD	device is Data Card
	enabled.

Insert your Data Card and follow any instructions that your clinician has given you. When you have done this, the message will

disappear from the LCD. Pressing (Ok) will also remove the message.

REPLACE	May appear when	Press	(Ok) to remove the message from
MASK	your mask is due for	your LCD, and replace your mask with a new
	replacement.	one.
CALL	May appear as a	Press	(Ok) to remove the message from
PROVIDER	reminder to contact	your LCD, and contact your clinician.
	your clinician, eg, to
	discuss how your
	therapy is going.

REPLACE	May appear as a
FILTER	reminder to replace
	the air filter on your
	device.

Press (Ok) to remove the message from your LCD, and replace the air filter.

SERVICE	May appear as a	Press	(Ok) to remove the message from
DUE	reminder to return	your LCD, and contact your clinician.
	your device for
	service.

Using the S8 Lightweight II 7