Start Treatment
LCD screen
Keypad 
Start/Stop key
1Make sure the power is on.
The product name is displayed briefly on the LCD screen, then the standby (Ramp) screen appears. The key and LCD backlights also turn on.
2Lie down and arrange the air tubing so that it is free to move if you turn in your sleep.
CAUTION
! Do not leave long lengths of air tubing around the top of your bed. They could twist around your head or neck while you are sleeping.
3Alter the ramp time if required (see “How to change the ramp time” on page 6).
4To start treatment, press 
.
5Fit your mask as described in the mask user instructions.
WARNING
! A mask should not be used unless the S8 Escape II device is turned on and operating properly.
When ramping begins the LCD will display the word "RAMPING", with the current pressure indicated as dashes. Each dash is approximately equivalent to 2 cm H2O. For example, 6 dashes represents approximately 12 cm H2O pressure.
Stop Treatment
To stop treatment at any time, remove your mask and press 
.
4
