Reassembling, Reassembly steps | ResMed Swift FX guide

Refer to the Swift FX disassembly illustrations in this user guide.

1–2. Remove the headgear by slightly twisting each headgear arm and pulling away from the node on the pillows.

3–4. Gently push the swivel ring up and pull out of the cushion.

Reassembling

Refer to the Swift FX reassembly illustrations in this user guide.

1–2. Insert the swivel ring into the opening of the cushion. Ensure that the cushion sits between the ridges of the swivel ring.

3.Rotate the elbow to ensure it moves freely.

4.Check that the inner walls of the nasal pillows are not compressed or collapsed. If so, squeeze each nasal pillow to release the inner wall.

5.Thread the headgear strap through the top buckle.

6.Hold the headgear arm with the recess facing you. Latch the headgear arm onto the node on the pillows.

7.Repeat step 6 with the other headgear arm.

8–9. Thread the back strap through each side of the headgear, then fold over to secure. Ensure that the hook tab is on the outside.

English