Swift FX Bella Gray
Note: The strap and soft sleeve are not intended to be dissassembled and can be washed together, while attached to the buckle.
Reassembly
Refer to the Swift FX Bella Gray reassembly illustrations in this user guide.
System reassembly steps
3.Rotate the elbow to ensure it moves freely.
4.Check that the inner walls of the nasal pillows are not compressed or collapsed. If so, squeeze each nasal pillow to release the inner wall.
5.Hold the buckle with the arrow facing you. Latch the buckle onto the node on the pillows.
6.Repeat step 5 with the other buckle.
Headgear reassembly steps (if required)
If you have disassembled your headgear it needs to be reassembled before attaching to the pillows.
1.Thread each strap through the soft sleeve. Pull the soft sleeve
up until it sits flush against the widest part of the strap. Ensure the soft sleeve lies flat on the strap.
2.Hold the buckle with the arrow facing up.
A.Ensuring the notches of the strap are facing the arrow head, thread the end of the strap down through the opening closest to the arrow head on the buckle.
B.Bring the end of the strap up through the other opening, making sure that the notches on the strap sit against each other.
Repeat these steps with each strap.
3.Ensure that the straps are not twisted.
English
5
