WARNING

!Only ResMed air tubing should be used with your flow generator. A different type of air tubing may alter the pressure you actually receive and reduce the effectiveness of your treatment. Do not use conductive or anti-static hoses or tubes.

4Connect your mask system to the free end of the air tubing.

Attaching a Humidifier

WARNING

!When using a humidifier, position it lower than your sleeping position, so that any excess condensation drains back into the water chamber, and at the same level or lower than the device.

Notes:

You must activate the humidifier option in the menus if you are using a HumidAire or Passover humidifier.

For details on using humidifiers, please see you relevant user manual.

HumidAire 2i/2iC Humidifier

The HumidAire 2i or 2iC attaches to the front of the device to provide heated or passover

humidification, respectively. No other accessories are required for its use. The

VPAP III ST-A with QuickNav automatically detects the presence of the HumidAire 2i.

HumidAire or Passover Humidifier

Medium size (52 cm) air tubing is a necessary accessory for connecting the device to the HumidAire or Passover humidifier.

Note: Place the device on top of the humidifier. Do not place the device underneath the humidifier. (This is to avoid water spilling into the device.)

Using the LCD QuickNav Screen and Keypad

The control panel of this device includes an LCD screen, LEDs and keypad.

Alarm LEDs

Alarm Mute

QuickView

Therapy LED

Start/Stop

Exit key (red)

Up/Down key

Enter (Soft) key (green)

LCD QuickNav screen

LCD Screen

The LCD screen displays the menus, treatment screens and alarm conditions.

4

Page 7
Image 7
ResMed VPAP III ST-A manual Attaching a Humidifier, Using the LCD QuickNav Screen and Keypad, HumidAire 2i/2iC Humidifier