Revolabs 01-HDEXEC-NM installation and operation guide Polycom SoundStructure

So for example, if you set the ‘Audio channels’ for the microphones to 1-8 in the Control Panel, then the Base Station will use the instance ID tag of “MUTE1”, and control the first 8 mutes in that fader block.

Note: Instance ID tags are case sensitive and must be entered correctly in order to function properly. A “level block” must be used as the method of muting.

Polycom SoundStructure

When using the Base Station along with a Polycom SoundStructure, you must select the corresponding DSP product line from the “Serial Control Processor” menu in the Revolabs HD Control Panel software. You must also set the RS-232 or Network settings of the Base Station to match the communication settings of the Polycom SoundStructure as well as select the ‘Audio Channels’ of the microphones that the Base Station is to simulate.(i.e. 1-8, 9-16, etc.)

Each Base station will control the mutes of each individual microphone channel, within the DSP programming, using that channel’s name. The name structure is as follows:

Channels 1-8	Revo 1	- Revo 8
Channels 9-16	Revo 9	- Revo 16
Channels 17-24	Revo 17 - Revo 24
Channels 25-32	Revo 25 - Revo 32
Channels 33-40	Revo 33 – Revo 40 (EU & CN Versions Only)
		- 23 -