Revolabs 01-HDEXEC-NM installation and operation guide Using the HD Wearable Wireless Microphones

4.Change the Low Pass Filter

5.Select DHCP or Fixed IP modes

6.Select Redundancy Mode

7.Select Power Scaling Mode

8.Select Mute Group

Note: Switching between High Definition, Max Density, and Redundancy modes will cause the Base Station to automatically reboot. A change in the IP configuration will require a power cycle to take effect.

Revolabs HD Microphones and HD Microphone Adapters

Use any of five microphones with your Revolabs HD ™ System:

•Revolabs HD Wearable Wireless Microphone

•Revolabs HD Omni-directional Tabletop Wireless Boundary Microphone

•Revolabs HD Uni-directional Tabletop Wireless Boundary Microphone

•Revolabs HD Universal Wireless Adapter for Handheld Microphones

•Revolabs HD Wireless Adapter for Countryman Microphones

Using the HD Wearable Wireless Microphones

The Revolabs HD Wearable Microphones, shown in the following figure, are paired to the Base Station and can be worn on the user’s shirt pocket, lapel or on a lanyard. They provide high quality full duplex audio between each user and the conferencing or audio system.

6

5

1	2	4
		3

1.Earpiece jack — accepts the 2.5mm plug for the earpiece.

2.Charging port — docks to Revolabs HD Charger Bases.

3.Pocket clip — also used to attach microphone to a lapel, blouse or lanyard.

4.Mute Button — press to mute, un-mute and pair microphone.

5.Acoustic Cover — protects delicate microphone element (non-removable).

6.LED display — visual status for mute, un-mute, and pairing.

Note: Microphones in new systems must be paired to the Base Station with each microphone assigned to a unique channel on the base unit. See pairing instructions below.

- 25 -