Revolabs 01-hdvenu Using the Rear Panel Configuration DIP Switches, DIP Switch 2 Low Pass Filter

Using the Rear Panel Configuration DIP Switches

off

on

1 2 3 4 5 6 7 8

DIP	Feature		Off (Default)						On
Switch
1	Output Mixing		Individual				Mixed Output
			Outputs
2	Low Pass Filter			No LPF					LPF
3	Audio Output		Line Level					Mic Level
	Level
4	Mute Mode		Individual					No Mutes
				Mutes
			All frequencies					Half of the
5	Sharing Mode						frequencies will
			will be used.
								be used.
6	A/B Freq Groups		A Frequencies				B Frequencies
		300'			150'	75'			25'
7	Transmit		Off		On		Off		On
8	Power		Off		Off		On		On

Changes in DIP switch configurations require a power cycle (off/on) to take effect.

Configuration Settings

DIP Switch 1- Output Mixing:

When DIP Switch 1 is OFF(default), each HD microphone has its own 3.5mm balanced audio output on the Base Station. When DIP Switch 1 is switched on, the audio outputs of the two HD microphones are mixed together and sent to both outputs.

DIP Switch 2 - Low Pass Filter:

When DIP switch 2 is OFF(default) the microphone provides the full audio bandwidth. When DIP switch 3 is ON, a LPF is activated reducing the audio bandwidth.

DIP Switch 3 – Audio Output Level:

When DIP switch 3 is OFF(default) the microphone outputs provide a line level signal~0 dBu. When DIP switch 3 is ON, the microphone outputs provide a mic level signal ~-40 dBu.

DIP Switch 4 - Mute Mode:

When DIP switch 4 is OFF(default) each microphone has its own individual muting capabilities. When DIP switch 4 is ON, the microphone mute buttons are deactivated resulting in the mics always being active and un-muted when not in the Charger Base.

- 10 -