![](/images/new-backgrounds/1256001/25600129x1.webp)
Adjusting the Volume on the Wearable Microphone Earpiece
To change the volume on the Wearable microphone earpiece, use the dial on the earpiece wire.
Turning the dial towards the earpiece, as shown in the figure, will increase the volume, and turning the dial towards the microphone will decrease the volume. Use the attached clothing clip to secure the earpiece wire.
Using the HD
The HD
|
| 360 º |
| 1 | pickup |
| pattern | |
|
| |
| 2 |
|
3 |
| 6 |
|
|
5
4
1.LED display — visual status for mute,
2.Mute button — press to mute,
3.Audio jack — accepts a 2.5mm plug.
4.Charging port — docks to Revolabs HD Charger Bases.
5.Rubber feet —
6.Acoustic Cover — protects delicate microphone element
To use the HD Omni Tabletop Microphone:
1.Remove the microphone from the Charger Base to turn on and automatically mute the mic. (indicated by a flashing RED LED)
2.Omni Tabletop microphones can be centered on the table within 2 to 6 feet (0.6 to 2m) away from people speaking and do not need to be pointing any particular direction because they pick up sound from all directions. It is always better to be as close to the person speaking as possible, but avoid placing the microphone where it might be blocked by equipment or paperwork. Avoid placing microphones too close to an audio or video conference speaker to avoid echoes. Make sure that the microphone is always placed lying on its rubber feet atop a flat surface.
-15 -