Revolabs 07-stemic-ppp specifications Line-to-Mic Converter Users Guide, Cable Specifications

Line-to-Mic Converter

Users Guide

The Revolabs Solo™ Line-to-Mic Converter cable is designed to facilitate Revolabs system installations requiring attenuation from line level to microphone level as found on many videoconferencing systems and audio mixers. The cable also blocks phantom power bias voltages up to 48V.

To use the Line-to-Microphone level converter cable:

Step One: Plug the 2.5mm mini-plug into the Solo Executive Single Channel analog line level input.

Step Two: Insert the XLR Male connector to a microphone-level (-40dB) input channel on the audio mixer or video codec.

Step Three: If desired, use the return audio RCA Female connector to monitor audio from the mixer / video codec through an earpiece connected to the microphone.

Cable Specifications

Length: 6 Ft (1.8m)

Connectors: 2.5mm Male mini-plug, RCA Female, XLR Male with Phantom-blocking 40 dB signal attenuation circuit

Model: 07-STEMIC-PPP

Warranty

Revolabs, Inc. warrants this product to be free of manufacturing defects. Repair or replacement of any defective part or unit (at the discretion of the Seller) will be free of charge for a period of 90 days after purchase.

Rev 1.1 10/07