Revolabs QSG-TTM quick start

Remove the microphone from the Charger Base. The microphones

turn on and mute themselves automatically when removed from

Charger Base (flashing RED LED) to prevent handling noise while

placing the microphone on the table.

The TableTop microphone should be centered on the table in front of

users, between 2 to 5 feet (.75 to 1.75m) away. It is always better to

put the microphone as close as possible to the person speaking, but

avoid placing the microphone where it might be blocked by laptops

or paperwork.

2 to 5 feet (.75 to 1.75m)

QSG-TTM-v1.0-2007

To turn microphones off, first mute the microphone, and then plug

it into the Charger Base. Make sure the RED LED turns on.

Optionally, the microphone can be turned off manually. Simply press

and hold the MUTE button for ~10 seconds until the LED turns solid

RED and release button.

With the microphone in position, un-mute the microphone by

pressing and releasing the MUTE button (confirm by viewing

flashing GREEN LED).

Flashing red = muted

Flashing green = un-muted

Mute/un-mute toggle button

Using a Solo TableTop Wireless Microphone

Revolabs Inc • 63 Great Road, Maynard, MA 01754 • 1-800-326-1088 • www.revolabs.com • info@revolabs.com