Insignia NS-42L550A11, NS-32L550A11 manual Making connections, Connecting a cable or satellite box

NS-32L_37L_42L550A11_09-1120_MAN_V2_English.book Page 14 Thursday, January 21, 2010 10:20 AM

NS-32L550A11/NS-37L550A11/NS-42L550A11 32"/37"/42" LCD, 120 Hz 1080p

2Follow your universal remote control’s instructions to enter the TV code you found in Step 1.

Tips

Connecting a cable or satellite box

Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best connection type available.

•If your universal remote control has a code search feature, run a code search to identify a code that matches your TV. See your universal remote control’s instructions for details.

•If your universal remote control has a “Learn” feature, you can manually program it using the Insignia TV remote to “teach” the commands one at a time. See your universal remote control’s instructions for details.

3 If all else fails, you must use a different universal

remote control that can operate both your

set-top box and your TV. Four such remotes are

Connection type

HDMI

Component

S-Video

Composite

Coaxial

Video quality

Best

Better than composite, S-Video, or coaxial

Better than composite or coaxial

Better than coaxial

Good

listed on the chart, but many other compatible

models are available in the market.

For more help, go to insigniaproducts.com or

call technical support for your universal remote

control or set-top box manufacturer, or call the

Insignia Customer Care Center. For US and

Canada markets, call 1-877-467-4289. For

Mexico markets, call 01 800-926-3000.

Making connections

Connecting the power

To connect the power:

•Plug the power cord into the AC IN jack on the back of your TV, then plug the other end of the cord into a power outlet.

Connecting an antenna or cable TV (no box)

To connect an antenna or cable TV (no box):

1Turn off your TV and all connected equipment.

2Connect a coaxial cable to the ANT/CABLE IN jack on the back of your TV and to the antenna or cable TV wall jack.

To connect a cable or satellite box:

1Connect the incoming cable from the cable TV or satellite TV wall jack to the cable-in jack on the cable box.

HDMI

Composite

S-VideoComponent

ANT/CABLE IN

Notes

•Use a coaxial cable to eliminate interference and noise from radio waves.

•Do not bundle the coaxial cable with the power cord or other cables.

•If the antenna is not installed correctly, contact qualified service personnel to correct the problem.

2Depending on the jacks available on the cable or satellite TV box, connect a cable from the outgoing jacks on the cable or satellite TV box to the corresponding jacks on the back or side of your TV. The connection can be to an HDMI jack, COMPONENT Y/PB/PR jacks, AV IN S-VIDEO, or AV IN VIDEO jack.

14 www.insigniaproducts.com