5Press MENU to return to the previous menu, or press EXIT to close the menu.
Notes
•It takes about 3 seconds after the menu closes and the picture disappears before the audio plays.
•Audio Only works only when the input source is TV and your TV is receiving a broadcast signal.
•To exit audio only mode, press any button. When you exit audio only mode, the Audio Only option is automatically reset to Off.
Changing channel settings
Note
Unless otherwise noted, all tasks in this section are based on using the remote control.
Automatically scanning for channels
When you scan for channels, your TV searches for channels with signals and stores the channel information in the channel list. When you press CH 
or CH 
, your TV goes to the next or previous channel in the channel list.
If the TV signal source changes, for example you change from an outdoor antenna to cable TV (no box), you need to scan for channels.
To automatically scan for channels:
1Press MENU. The on-screen menu opens.
| PICTURE | AUDIO CHANNELS | SETTINGS | USB |
Picture |
|
|
|
|
Mode |
| Energy Savings | ||
Brightness |
|
|
| 50 |
Contrast |
|
|
| 48 |
Color |
|
|
| 70 |
Tint |
|
|
| 0 |
Sharpness |
|
|
| 0 |
MOVE | OK | MENU PREVIOUS |
| EXIT |
ENTER SELECT | EXIT | |||
3Press 
to highlight Auto Channel Search, then press OK/ENTER or 
to access the submenu. The Auto Channel Search screen opens.
| PICTURE | AUDIO CHANNELS SETTINGS | USB | ||
Channels Auto Channel Search |
|
|
|
| |
Choose your TV source |
|
|
|
| |
Antenna |
| 0 | Analog Channels |
|
|
|
|
|
|
| |
Cable |
| 0 | Digital Channels |
|
|
|
|
|
|
| |
Cable/Satellite Box |
|
|
|
| |
MOVE | OK |
| PREVIOUS |
| EXIT |
ENTER SELECT | MENU | EXIT | |||
Select Antenna if using an antenna for standard or HD TV
4Press 
to highlight Antenna, Cable, or Cable/Satellite Box, then press OK/ENTER to start the scan.
•If you are using an antenna for a standard or HD TV signal, select Antenna.
•If your cable is connected directly to the TV (using no tuner box), select Cable.
•If your cable is connected to your TV through a tuner box, select Cable/Satellite Box.
If you selected Antenna or Cable, your TV searches automatically for available channels in your area and stores the channel information in the channel list. This may take several minutes. While searching, the TV displays a progress report.
Or,
If you selected Cable/Satellite Box, the channel search is not necessary. Press EXIT to close the menu.
Note
You can press EXIT to stop the auto channel search, but you will need to run the auto channel search again to create a channel list.
Adjust settings to affect picture quality
2Press 
or 
to highlight CHANNELS. The Channels menu opens.
| PICTURE | AUDIO CHANNELS SETTINGS | USB |
| |
Channels |
|
|
|
|
|
Auto Channel Search |
|
|
|
| |
|
|
|
| ||
Add/Skip Channels |
|
|
|
|
|
Favorites |
|
|
|
|
|
Channel Labels |
|
|
|
|
|
Channel Strength |
|
|
|
|
|
Audio Only | OK |
|
| Off |
|
|
|
| |||
MOVE | MENU PREVIOUS |
| EXIT |
| |
ENTER SELECT | EXIT |
| |||
Adjust channel options
26 | www.insigniaproducts.com | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
