Revox M10 manual Scene function, Scene example

M10 Re:system

Scene function

The Scene function has been integrated with the introduction of version 2.00 of the software. This enables music to be started in different zones and rooms at the press of a button. The choice of which source and which volumes should be selected for the individual rooms is defined once when you save a scene.

An audio scene can be called either through a primary building management system or through the M230 / M-Scope service program.

Within the Revox world, a scene only covers the audio side. Linking the Revox scene with, for example a light or window-blind scene, is done through the building control software.

Select the Scene softkey in the Setup main menu.

A total of 16 scenes are available.

There are four functions for managing scenes:

a.Saving a scene

b.Calling a scene

c.Deleting a scene

d.Renaming a scene

Scene example

Scene Morning
-----------------------------------------------
Zone 1
Source:	Tuner	Station 4
Room	Status	Volume
Kitchen	On	10
Diner	On	8
Lounge	Off	-
-----------------------------------------------
Zone 2
Source:	CD	Title 1
Room	Status	Volume
Bathroom	On	12
Dressing	On	5
-----------------------------------------------
Zone 3
Source:	Tuner	Station 2
Room	Status	Volume
Nursery	Undefined
Hallway	Off	-
-----------------------------------------------
Zone 4
Source:	Tuner	Station 4
Room	Status	Volume
Cinema	Off	-
Sauna	Off	-

Status: Undefined The room retains its current status.

30