M10 Re:system
17
M-Text Protocol (UDP)
As well as understanding the
Revox internal M-Link protocol,
the M10 Ethernet interface with
the software version 1.10 or
higher also understands the clear
text commands (M-Text protocol)
in ASCII format.
This makes it possible to integrate
the Revox system in a domestic
control system, e.g. with the
GIRA Home Server.
As the name M-Text implies, it is a
very understandable protocol,
which simplifies the programming,
as commands are not in an
encrypted form but in English.
The following is an example of a
Revox M-Text command where
the function is instantly
recognisable. In this case it
concerns setting the volume to 15
(of 40 steps):
xx:SET:VOLUME:15
M233 Display panel
The M233 software is a General
User Interface GUI or also known
as OSD for the Revox Multiroom
System, which can be installed on
a Windows XP platform as part of
a Touchscreen display.
This makes it possible to control
each room in the Revox Multi-
room system through the
visualisation.
The data traffic runs over the
Ethernet interface integrated in
the M10. Each Re:system slave
integrated in the Multiroom needs
its own M202 Ethernet interface.
The size, colour and position of
the M233 display within the
visualisation on the Touchscreen
display is defined one-time in the
corresponding ini file.