120 | Re:sound L |
Power Handling Capacity
The power handling capacity stated on the type plate of your Revox loudspeakers refers to an amplifier with tone control set to linear. lt is possible to use these loudspeakers with amplifiers rated for a higher power output.
However, ensure that the volume is only increased until your ear - in most cases reliably
Your Revox loudspeakers will not be damaged by a
Damage of Ioudspeaker drivers due to overload can easily be determined by the service personnel. In such cases, you are not entitled to any warranty work.
Using spikes
The Re:sound L120 is fitted with spikes during manufacture. The spikes serve to decouple the speaker from the floor it is placed on. For this purpose, the 4 spikes are screwed into the threaded sockets on the base of the speaker. The last few millimetres of the thread should be used for ensuring that the speaker is level, so that the weight of the speaker is distributed evenly over all four spikes.
Use the supplied spike cups, with felt disc under the spikes, to avoid scratching the floor.
English
12
