RF-Link Technology WRT55AG manual Instant Wireless Series

Instant Wireless® Series

5.Now, power off your modem and disconnect your Internet connection. Then, connect the Router as shown on the screen displayed. If you have a cable connection, you will see a screen similar to that shown in Figure 5-4. If you have a DSL connection, you will see a screen similar to that shown in Figure 5-5. When the connections are made, click the Next button to con- tinue.

Figure 5-4 Figure 5-5

Note: After the Router is connected, your PC may try to connect directly to the Internet. Since the connection will now be made through the Router, you can disregard (click Cancel) any attempt your PC makes to connect.

6.Power on your modem and connect the power to the modem and the Router. As shown on the following screen, verify that the Router’s LEDs are cor- rectly lit. If you have a cable connection, you will see a screen similar to that shown in Figure 5-6. If you have a DSL connection, you will see a screen similar to that shown in Figure 5-7. When the LEDs are lit appro- priately, click the Next button to continue.

Figure 5-6 Figure 5-7

If you are using a Static IP Address to connect to the Internet, proceed to step 7a. If you are using a DHCP connection, proceed to step 7b. If you are using a PPPoE connection, proceed to step 7c.

Dual-Band Wireless A+G Broadband Router

6a. While making your Internet connection, the Router will require you to Log in, as shown in Figure 5-8. Enter the default password: admin. Then, click the OK button. (This password should be changed from the Web-based Utility’s Password tab for greater security.)

Figure 5-8

7a. When connecting to the Internet through a Static IP Address:

The Setup Wizard will now ask you to make changes to your PC’s TCP/IP settings. Follow the instructions shown, clicking the Next button to continue.

If you are using Windows 98 or Me, the instructions will start as shown in Figure 5-9.

Figure 5-9

22 23