![](/images/new-backgrounds/1121511/12151145x1.webp)
Instant Wireless® Series
PPTP
Point to Point Tunneling Protocol (PPTP), selected in the screen shown in Figure
Figure
Specify Internet IP Address This is the Router’s IP address, when seen from the Internet. Your ISP will provide you with the IP Address you need to speci- fy here.
Subnet Mask This is the Router’s Subnet Mask, as seen by external users on the Internet (including your ISP). Your ISP will provide you with the Subnet Mask.
Default Gateway Your ISP will provide you with the Default Gateway Address.
User Name and Password Enter the User Name and Password provided by your ISP.
Connect on Demand: Max Idle Time You can configure the Router to cut the Internet connection after it has been inactive for a specified period of time (Max Idle Time). If your Internet connection has been terminated due to inac- tivity, Connect on Demand enables the Router to automatically
Keep Alive Option: Redial Period If you select this option, the Router will peri- odically check your Internet connection. If you are disconnected, then the Router will automatically
To apply any of the settings you change on this page, click the Apply button. To cancel any changes you’ve entered on this page, click the Cancel button. To get more information about the features, click the Help button.
LAN
IP Address and LAN Subnet Mask The values for the Router’s IP Address and Subnet Mask are shown here. The default values are 192.168.1.1 for the LAN IP Address and 255.255.255.0 for the Subnet Mask.
WIRELESS
5GHz, 802.11a Wireless To enable 5GHz, 802.11a wireless networking, make sure the Enable radio button is selected. Click the Change 5GHz Settings but- ton to customize the 802.11a configuration (see Figure
2.4GHz
38 |
| 39 |
|
|
|