Rheem CMR75245 warranty Available in 40 and 60 Imperial Gallon Electric Models

MARATHON™ Residential Electric Water Heaters

Available in 40 and 60 Imperial Gallon Electric Models

￿ Lifetime Limited Tank Warranty* ￿ 5 Year Limited Parts Warranty*

•The seamless, blow-molded, polybutylene tank is impervious to rust and corrosion

•Multiple layers of filament wound fiberglass give the tank unmatched strength

•The tank is designed, built and warranted not to leak “for as long as you own your home”

•Envirofoam insulation is free of ozone depleting CFC’s and HCFC’s so it saves the planet and it saves energy

•Pipe wrap energy kit included to reduce heat loss from plumbing lines

•Recessed drain valve is out of the way of brooms and scrubbers

•Tough molded outer shell resists dents and scratches

•Factory installed temperature and pressure relief valve for greater value and security

•Conduit between control boxes facilitates wiring for “off-peak” use

•All plastic tank eliminates the need for an anode rod – preventing potential odor problems

•C191.1 CSA Energy Efficiency

*See Residential Warranty Information Brochure for complete warranty information.

	TANK CAPACITY				ROUGHING IN DIMENSIONS (SHOWN IN INCHES)			SHIPPING WEIGHT
			ELEMENT		TANK	HEIGHT TO
	IMPERIAL		WATTAGE		HEIGHT	WATER CONN.	DIAMETER
MODEL NUMBER	GALLONS	LITRES	@ 240 VOLTS	AMPERAGE	A	B	C	LBS.	KG
CMR50245	40	180	4500/4500	18.75	62-3/4	66-3/4	23-1/2	103	46.7
CMR75245	60	270	4500/4500	18.75	58-1/2	62-1/2	28-1/4	127	57.6

CONSTRUCTION FEATURES

1.Energy Saving Pipe Wrap Kit – reduces heat loss through plumbing lines.

2.Temperature and Pressure Relief Valve – factory installed.

3.Water Tight Grommets – keep out overhead moisture and condensation.

4.Seamless Molded Non-metallic Inner Tank – can’t rust or corrode.

5.Fill Tube – high temperature material to withstand thermal storage and other high temperature applications.

6.High-tech Heating Elements – upper element fused to protect tank against “dry fire”. Bottom element low watt, stainless steel for long life.

7.Polyethylene Outer Jacket – resists dents and scratches during transit, installation and beyond.

8.Envirofoam™ – a great energy saver and friendly to the ozone layer. It’s made without CFC’s and HCFC’s.

9.Fiberglass Tank – has unmatched strength.

10.Recessed Drain Valve – protected from damage.

Your Marathon is warranted not to leak for as long as you own your home*…

The Marathon offers this no-leak promise because of its superior, non-metallic PermaGuard tank construction…A seamless blow molded polybutylene inner tank with a filament wound fiberglass outer tank for maximum strength. Superior performance, high-efficiency and low operating cost…for a lifetime*!

*See Residential Warranty Information Brochure at your dealer for complete warranty information.

5-3/4"

C

A B

In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.

Rheem Manufacturing Company • Water Heater Division

Rheem Canada Ltd.,128 Barton Street West, Hamilton, Ontario L8N 3P3

Customer Service 1-800-268-6966

Warranty1-800-263-8342

F O R M N O . 1 0 1 - 4 2 C A N 0 3 / 0 4 W P

EST. 1947

RHEEM

CANADA LTD/LTÉE

THANKS TO OUR EMPLOYEES

WE ARE

ISO9002

REGISTERED