Rheem Gas Hot Water Supply Heaters warranty Available in Indoor and Outdoor Models

Gas Hot Water Supply Heaters

Available in Indoor and Outdoor Models

136,000 thru 1,826,000 BTU/Hr.

Rheem-Ruud hot water supply heaters are designed to pro- vide hot water service to a variety of commercial applications when used in conjunction with an appropriately sized storage tank. These models are particularly suited for applications that require high inputs and large volumes of stored hot water.

Construction Features:

Indoor Models

•Reliable heat exchanger Design – The all copper heat exchanger is a single bank, straight-through design with a floating return header immune to thermal shock.

•Energy saving pump control – The energy saving pump control is an electric device that allows the operator to set the desired time for the pump to run after the water heater shuts off. With the energy saving pump con- trol the water heater pump is programmed to contin- ue running for an optimum period of time in order to absorb the residual heat from the combustion chamber and use it in the system.

•Compact design – The low water heater mass design offers substantial savings in weight and cube over most cast iron, steel tube and storage-type water heaters making it ideal for rooftop installations and in tight quarters.

•Minimal heat loss design

– Spark-to-pilot (IID) system is standard on all models.

•Glasslined cast iron headers –

To handle aggressive water conditions. (Models GBBP/GBB136 feature bronze headers.)

Indoor and Outdoor

Models

Pump Mounted Models

Available

5 Year Limited Warranty

Certifications and Ratings:

•Efficiency – These models have been tested according to ANSI test procedures, and meet or exceed the 80% thermal efficiency requirement of current ASHRAE standards (Part of the Federally mandated Energy Policy Act (EPact)). Also exceeds energy efficiency codes of all states.

•Safety and Construction – These products are design certified by the CSA: a) As a Hot Water Supply Water Heater equipped with on/off controls for use in conjunction with a storage tank. b) For operation at 180°F. c) To meet all safety and construction requirements of ANSI Z21.10.3.c) For installation on combustible flooring when used with a combustible floor base, and, or e) for alcove installation. ASME construction is standard on all models.

Certified for a 160 PSI Maximum Working Pressure.

Continued next page.