Manuals / Rheem / Household Appliance / Water Heater

Rheem HG Relief Valve, To Fill the Water Heater, Condensation, Care and Cleaning Operating

Models: HG

1 24
Download 24 pages 46.61 Kb
Page 10
Image 10

Safety Instructions

Installing the water heater.

A new combination temperature and pressure relief valve, complying with the Standard for Relief Valves and Automatic Gas Shut-Off Devices for Hot Water Supply Systems, ANSI Z21.22, is supplied and must remain in the opening provided and marked for the purpose on the water heater. No valve of any type should be installed between the relief valve and the tank. Local codes shall govern the installation of relief valves.

Relief Valve

Instructions Installation Instructions

The pressure rating of the relief valve must not exceed 150 PSI, the maximum working pressure of the water heater as marked on the rating plate.

The BTUH rating of the relief valve must equal or exceed the BTUH input of the water heater as marked on its rating plate.

Position the outlet of the relief valve above a suitable open drain to eliminate potential water damage. Piping used should be of a type approved for hot water distribution.

The discharge line must be no smaller than the outlet of the valve and must pitch downward from the valve to allow complete drainage (by gravity) of the relief valve and discharge line.

The end of the discharge line should not be threaded or concealed and should be protected from freezing. No valve of any type, restriction or reducer coupling should be installed in the discharge line.

Care and Cleaning Operating

WARNING: The tank must be full of water before heater is turned on. The water heater warranty does not cover damage or failure resulting from operation with an empty or partially empty tank.

To Fill the Water Heater

Make certain that drain valve is closed, then open the shut-off valve in the cold water supply line.

Open each hot water faucet slowly to allow the air to vent from the water heater and piping.

A steady flow of water from the hot water faucet(s) indicates a full water heater.

Customer Service Troubleshooting Tips

Condensation

Condensation can form on the tank when it is first filled with water. Condensation might also occur with a heavy water draw and very cold inlet water temperatures.

Drops of water falling on the burner can produce a sizzling or pinging sound, and the water may also be seen beneath the water heater.

This condition is not unusual, and will disappear after the water becomes heated. If, however, the condensation continues, examine the piping and fittings for possible leaks.

10

Page 9 Page 11
Page 10
Image 10
Rheem HG installation instructions Relief Valve, To Fill the Water Heater, Condensation, Care and Cleaning Operating
Page 9 Page 11

HG specifications

Rheem HG is a groundbreaking water heating solution designed to meet the needs of modern households and commercial spaces. Known for its efficiency and reliability, the Rheem HG product line integrates advanced technologies and innovative features, making it a standout choice in the competitive water heater market.

One of the primary features of the Rheem HG series is its energy efficiency. With an impressive Energy Factor (EF) rating, these water heaters utilize cutting-edge heat pump technology to extract heat from the air, significantly reducing the amount of electricity required to heat water. This efficient operation not only leads to lower utility bills but also contributes to environmental sustainability.

The Rheem HG series is equipped with smart technology, allowing users to monitor and control their water heating system remotely. Through a user-friendly mobile app, homeowners can adjust temperature settings, receive maintenance alerts, and track energy usage, ensuring optimal performance and peace of mind. This connectivity feature exemplifies Rheem’s commitment to integrating the latest smart home technologies into its products.

In addition to energy efficiency and smart features, Rheem HG is designed with durability in mind. Built with high-quality materials, these water heaters are resistant to corrosion and have extended warranties that reflect their reliability. The innovative construction also includes advanced insulation, which minimizes heat loss, ensuring that hot water is readily available whenever needed.

Another significant characteristic of the Rheem HG series is its versatility. Available in various sizes and capacities, these water heaters can accommodate the hot water demands of different households, from small apartments to larger homes. The flexibility in installation options, including both indoor and outdoor configurations, makes it easier for homeowners to find a solution that fits their specific requirements.

Safety features are paramount in the design of the Rheem HG series. Equipped with advanced leak detection systems, automatic shut-off mechanisms, and enhanced temperature control, these water heaters prioritize the safety of users while delivering consistent performance.

In summary, Rheem HG represents a fusion of energy efficiency, modern technology, durability, versatility, and safety. With its commitment to innovation and sustainability, Rheem continues to be a leader in the water heating industry, providing solutions that cater to the evolving needs of today’s consumers. Choosing a Rheem HG water heater not only guarantees high performance but also supports a greener future.