OPERATION
Tractor PRE-OPERATION Inspection
Mower ID#________________ | Make | ____________________ | |
Date: | ________________ | Shift | ____________________ |
Before conducting the inspection, make sure the tractor engine is off, all rotation has stopped and the tractor is in park with the parking brake engaged. Make sure the mower is resting on the ground or securely blocked up and all hydraulic pressure has been relieved.
| Item | Condition at | Specific Comments if | |
| Start of Shift | not O.K. | ||
|
| |||
|
|
|
|
|
The flashing lights function properly |
|
|
| |
The SMV Sign is clean and visible |
|
|
| |
The tires are in good condition with proper pressure |
|
|
| |
The wheel lug bolts are tight |
|
|
| |
The tractor brakes are in good condition |
|
|
| |
The steering linkage is in good condition |
|
|
| |
There are no visible oil leaks |
|
|
| |
The hydraulic controls function properly |
|
|
| |
The ROPS or ROBS Cab is in good condition |
|
|
| |
The seatbelt is in place and in good condition |
|
|
| |
The |
|
|
| |
The drawbar pins are securely in place |
|
|
| |
The PTO master shield is in place |
|
|
| |
The engine oil level is full |
|
|
| |
The brake fluid level is full |
|
|
| |
The power steering fluid level is full |
|
|
| |
The fuel level is adequate |
|
|
| |
The engine coolant fluid level is full |
|
|
| |
The radiator is free of debris |
|
|
| |
The air filter is in good condition |
|
|
| |
Operator’s Signature: |
|
|
| |
|
|
|
|
|
DO NOT OPERATE an UNSAFE TRACTOR or MOWER
SE42 03/08 | Operation Section |
© 2008 Alamo Group Inc.
