Riccar R700, R500, R600, R800C owner manual Operation, Fig. Fig, Replacing vacuum bag

Operation

Replacing vacuum bag

Genuine Riccar vacuum bags should

be used for best performance and air filtration. Always operate the vacuum cleaner with a vacuum bag installed.

NOTE: If secondary or post filters need to be replaced, see page 9 before replacing the vacuum bag.

1.Remove the used vacuum bag by pulling bag collar off the bag holder [Fig. 10]. Do not re-use filled vacuum bags.

2.Attach the new vacuum bag onto the bag holder.

3.Re-insert the tab on bottom edge of bag compartment cover into the groove on the bag compartment housing [Fig. 11]. Press it into place and close the bag compartment cover tightly.

Fig. 10

Fig. 11