Operation
Unclogging nozzle and hose
CAUTION: Disconnect the vacuum cleaner from the electrical outlet before cleaning nozzle housing.
The nozzle hose, located on the back of the vacuum, carries the dirt from the nozzle to the vacuum bag. The hose also functions as the attachment cleaning hose. First check to see that a bag is installed or that the bag has not broken open.
If the hose should become clogged:
1.Pull out and turn the lid of the cleaning attachment opening. Remove the clog or blockage [Fig. 23].
2.Remove hose cuff from nozzle inlet and check for clog [Fig. 24].
3.Turn unit over and remove bottom plate (See “Removing and
Fig. 23
Fig. 24
Fig. 25
12