NEC NP2000, NP1000 Select WEP page if necessary, Select Key Select only when WEP is selected

5. Setting the LAN Setting of Projector

13Select “WEP” page (if necessary).

Proceed to step 17 if WEP is not set.

<1> Use the SELECT / button to select the “Network Type” tab, and press the button to highlight the “WEP” tab.

The “WEP” page will be displayed.

14Select “WEP”.

Select whether WEP (encryption) is performed or not.

To perform WEP (encryption), set an encryption key.

•	Disable	WEP (encryption) is not performed. There is a danger that the contents of
		communication are monitored.
•	64 bit	64-bit data is used as an encryption key of WEP.
•	128 bit	128-bit data is used as an encryption key of WEP.
•	152 bit	152-bit data is used as an encryption key of WEP.

Security is reinforced as the number of bits is increased.

15Select “Key Select” (only when WEP is selected).

If “64 bit”, “128 bit”, or “152 bit” is selected from “WEP”, select which of the following encryption keys,

“Key 1” to “Key 4”, is to be used.

5

Setting the LAN Setting of Projector

21