4. Attaching Wireless LAN Card

Removing card from PC card slot

1Press POWER ON/STAND BY button to set the projector to Stand-by mode, press the “O (off)” side of the main power switch of the projector.

2Slowly press the PC card eject button.

The PC card eject button will slightly come forward.

3Slowly press the PC card eject button once again.

The inserted card will slightly come forward.

SELECT

3D R

 

EFORM

 

AUTO

ADJUST

 

SOURCE

ON/STANDBY

PC

CARD

LAMP

PO STATUS

 

WER

 

4Slowly pull out the card.

Reference PC Card Lock

The supplied PC card lock prevents an optional wireless LAN card from being ejected during use.

The screw for the PC card lock is mounted under the PC card slot on the rear side of the projector. To attach the PC card lock to the projector, first remove the screw and use it.

￿

S

 

ELECT

￿

 

S ELECT

￿

SELECT

Wireless LAN card

PC card lock

12

Page 14
Image 14
NEC NP1000 Removing card from PC card slot, Slowly press the PC card eject button once again, Slowly pull out the card