Riccar RSL2C, RSL1 owner manual Assembling The Vacuum, Secure with two screws removed in step

ASSEMBLING THE VACUUM

3.Place the handle bracket back into position (diagram 3).

4.Secure with two screws removed in step 1.

Positioning the power cord: (Models RSL1 only.)

1.Loosen, but do not remove, the screw holding the upper cord hook (diagram 4).

2.Position the cord between the cord hook and the vacuum tube (diagram 5). Re-tighten the screw.

3.Once the cord is secured by the cord hook, proceed with wrap- ping the cord.

3

4

5

5