HOW TO CHANGE THE BELT
CAUTION: First, disconnect the vacuum
cleaner from the electrical outlet.
1.Turn the unit over and remove the bottom plate (see "How to Remove Bottom Plate").
2.Remove the brush roll and the worn or broken belt from the brush roll pulley and the motor drive shaft (diagram 13).
3.Loop the new belt around the motor drive shaft and the brush roll (diagram 14).
4.Reinstall the brush roll back into the housing. Turn the brush roll by hand, making sure the belt is not twisted and all rotating parts move smoothly (diagram 15).
5.Reinstall the bottom plate (see "How to Install Bottom Plate").
NOTE: To ensure maximum cleaning efficiency, the belt should be checked regularly to be sure it is in good con- dition. Check to see if the belt is stretched, cracked, or if excessive slipping has occurred. Replace if needed.
13
14
New belt
15
9
