Setting Originals
Setting the Original in the Auto Document Feeder (ADF)
Note
❒Do not set originals in the Auto Document Feeder (ADF) in excess of the upper limit mark. (Stacked height: Not more than 15mm (0.6"))
❒The number of sheets that can be set in the Auto Document Feeder (ADF) at one time depends on the size and weight (thickness) of the originals. Use the following table as a guide:
|
|
| Number of |
Stacked height | Weight | Size | sheets that can |
|
|
| be set |
|
| A4, A5, | 110 |
| 105g/m2 | (LT, HLT) | |
|
| ||
15mm | (24lb) | A3 | 80 |
| |||
(0.6") |
| (DLT) | |
|
| ||
|
|
|
|
| 64g/m2 | A4, A5, A3 | 150 |
| (20lb) | (LT, HLT, DLT) | |
|
| ||
|
|
|
|
Limitation
❒When the original has a dark background, the scanner may not be able to recognize that a document has been placed in the ADF. If this happens, place the document on the contact glass instead.
AAlign the originals on the ADF.
∙When scanning large originals, pull out the auxiliary table.
∙Adjust the stopper on the output table according to the size of the originals.
1:Auxiliary table
2:Stopper
21
