Ricoh G410, G411 Error Indicators and Solutions, Troubleshooting, Description of error Action

5. Troubleshooting

Error Indicators and Solutions

When the indicators are on or flashing in any of the following combinations, an error has occurred. After confirming the nature of the error, take the appropriate action.

				Description of error	Action
❍	●	●	❍	The Auto Document Feeder	Close the Auto Document
				(ADF) or the ADF cover is	Feeder (ADF) or the ADF
				not closed properly.	cover.
❍	●	✕	❍	An original is jammed in	Refer to P.29, “Procedures
				the Auto Document Feeder	to Correct Errors in the
				(ADF).	ADF,” and remove the
					jammed paper.
❍	●	❍	❍	An original was not output	Refer to P.29, “Procedures
				properly from the Auto	to Correct Errors in the
				Document Feeder (ADF).	ADF,” and remove the paper
					that was not output.
❍	●	✕	✕	There is a problem with the	Refer to P.29, “Procedures
				operation of the document	to Correct Errors in the
				table.	ADF” and open and close
					the ADF cover.
✕	✕	❍	●	The Endorser (printing	Try opening and closing the
				function) may have	Auto Document Feeder
				malfunctioned.	(ADF) several times. If the
					same error occurs, contact a
					service center.
✕	✕	✕	✕	System error	Contact a service center.

❍: On

✕: Flashing

●: Off

28