Accessing User Tools ( System Settings )

Accessing User Tools ( System Settings )

This section is for key operators in charge of this machine.

User Tools allow you to change or set defaults.

Note

❒Operations for system settings dif- fer from normal operations. Al- ways quit User Tools when you have finished. See p.22 “Quitting User Tools”.

❒Any changes you make with User Tools remain in effect even if the

main power switch or operation switch is turned off, or the {Clear Modes}key is pressed.

Changing Default Settings

Note

❒If a key operator code is already set, the key operator code entry display appears. Enter the key op-

erator code, and then press the {OK} key. See p.27 “Key Operator Code”.

A Press the {User Tools/Counter}key.
B Select [System Settings] using {U} or {T}, and then press the {OK} key.

3

C Select the menu using {U}or {T}, and then press the {OK}key.

Reference

p.19 “User Tools Menu ( System Settings )”.

D Select the item using {U}or {T}, and then press the {OK}key.

E Change settings by following instructions on the display, and then press the {OK}key.

Note

❒To cancel changes made to set-

tings and return to the initial display, press the {U s e r Tools/Counter}key.

ARK033S

21