Copy Paper

Important

If you use damp or curled paper, a misfeed might occur. In such a case, try turning over the paper stack in the paper tray. If there is no improvement, change to copy paper with less curl.

Note

When using the bypass tray, we recommend you set the copy paper direction to L.

When printing on envelopes, note the following:

Load the envelope with the copy side face down on the bypass tray.

Check that envelope flap is securely folded up.

Before loading the envelope, flatten the leading edge (the side being fed into the machine) by running a pencil or ruler across them.

Use only rectangular envelopes.

Some kinds of envelopes might wrinkle or the print quality may be affect- ed, especially on overlaps.

If you load paper of the same size and in the same direction in two trays, the

machine automatically shifts to another tray when the tray in use runs out of

paper. This function is called Auto Tray Switching. This saves interrupting a 6 copy run to replenish paper even when making a large number of copies. You

can cancel this setting. See “Auto Tray Switching”, Copy Reference.

Reference

To add paper, see Copy Reference.

To change the paper size, see p.39 “Changing the Paper Size”.

51