
Troubleshooting
F Square the paper and load it in the tray.
H While pressing the release lever, set the back fence to the new size.
ARK015S
4
❒Be sure to set the paper under the roller.
❒Do not stack paper over the lim- it mark.
G While pressing the release lever, adjust the side fences to the new paper size.
ARK016S
Important
❒When setting small quantities of copy paper, be careful not to squeeze in the side fence too much or paper will not feed in properly.
ARK017S
I Push the paper tray in until it stops.Changing the Paper Size in the Paper Tray Unit (Tray 2)A Make sure the paper tray is not in use.
B Pull out the paper tray until it stops. Note
❒Remove any remaining copy paper.
C While pinching the release lever, adjust the back fence.40